2020- Peer-reviewed journals

Q1 (Scopus indicated)
Progress and challenges of 3D-printing technologies in the manufacturing of piezoceramics.
Smirnov, S. Chugunov, A. Kholodkova, M. Isachenkov, A. Vasin, I. Shishkovsky. Ceramics International
Environmentally Friendly Method of Silicon Recycling: Synthesis of Silica Nanoparticles in an Aqueous Solution, ACS Sustain.
J. Bondareva, T. Aslyamov, A. Kvashnin, P. Dyakonov, Y. Kuzminova, Y. Mankelevich, E. Voronina, S. Dagesyan, A. Egorov, R. Khmelnitsky, M. Tarkhov, N. Suetin, I. Akhatov, and S. Evlashin. Chem. Eng.
Experimental characterisation of textile compaction response: A benchmark exercise.
A.X.H.Yong, A.Aktas, D.May, A.Endruweit, S.Lomov, S.Advani, P.Hubert, S.Abaimov, D.Abliz, I.Akhatov, M.Ali, S.Allaoui, T.Allen, D.Berg, S.Bickerton, B.Caglar, P.Causse, A.Chiminelli, H.Wang. Composites Part A: Applied Science and Manufacturing.
Efficient contouring of functionally represented objects for additive manufacturing.
Popov, D., Maltsev, E., Fryazinov, O., Pasko, A., & Akhatov, I. Computer-Aided Design
Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique.
K. Mohammadi, M. Movahhedy, I. Shishkovsky, R. Hedayati. Applied Physics Letters
Reactive Burgers model for detonation propagation in a non-uniform medium.
A. R. Kasimov and A. R. Gonchar. Proceedings of the Combustion Institute
Residual strength estimation of a laminated composite with barely visible impact damage based on topology optimization.
Fedulov, B.N., Fedorenko, A.N. Struct Multidisc Optim
Role of Nitrogen and Oxygen in Capacitance Formation of Carbon Nanowalls.
Evlashin, S. A., Fedorov, F. S., Dyakonov, P. V., Maksimov, Y. M., Pilevsky, A. A., Maslakov, K. I., Kuzminova, Y. O., Mankelevich, Y. A., Voronina, E. N., Dagesyan, S. A., Pletneva, V. A., Pavlov, A. A., Tarkhov, M. A., Trofimov, I. V., Zhdanov, V. L., Suetin, N. V., & Akhatov, I. S. The Journal of Physical Chemistry Letters
Automatically controlled morphing of 2D shapes with textures.
Tereshin, V. Adzhiev, O. Fryazinov, F. Marrington-Reeve, A. Pasko. SIAM Journal on Imaging Sciences
Towards a theory of dynamics of a single cavitation bubble in a rigid micro-confinement.
K. Leonov, I. Akhatov. International Journal of Multiphase Flow
Software for Bioprinting.
Pakhomova, C., Popov, D., Maltsev, E., Akhatov, A., Pasko, A. Int J Bioprint
Numerical Modeling of the Evolution of Arcades and Rock Pillars.
Safonov, Alexander, Michal Filippi, David Mašín, and Jiří Bruthans. Geomorphology
Alexander Ryabov, Iskander Akhatov & Petr Zhilyaev. Scientific Reports
DOI: 10.1038/s41598-020-64619-8
Model of graphene nanobubble: Combining classical density functional and elasticity theories.
Aslyamov, T. F., Iakovlev, E. S., Akhatov, I. S., Zhilyaev, P. A. The Journal of Chemical Physics
Optimal milling modes identification of a jet-engine blade using time-domain technique.
Nikolaev, S., Kiselev, I., Kuts, V. Int J Adv Manuf Technol
Kinetic multiscale scheme based on the discrete-velocity and lattice-Boltzmann methods.
Aristov, V. V., Ilyin, O. V., and Rogozin, O. A. In: Journal of Computational Science
Edge flow profile under radial injection at constant pressure: Analytical predictions vs. experiment.
Abaimov, S.G., Lebedev, O.V., Grishaev, V., Gilmutdinov, B.N., Akhatov, I.S. Composit. Struct.
A semi-implicit conservative sharp-interface method for liquid-solid phase transition.
J.W.J. Kaiser, S. Adami, I.S. Akhatov, N.A. Adams. International Journal of Heat and Mass Transfer
Influence of laser cycling on electro-structural features of nickel-titanium SMA fabricated by LPBF process. 
Shishkovsky I., Scherbakof V. Applied Surface Science
Modeling of cracking during pultrusion of large-size profiles.
A. Safonov, M. Gusev, A. Saratov, A. Konstantinov, I. Sergeichev, S. Konev, S. Gusev, I. Akhatov. Composite Structures
The effect of the parameters of the powder bed fusion process on the microstructure and mechanical properties of CrFeCoNi medium-entropy alloys. 
Kuzminova, Y., Firsov, D., Dudin, A., Sergeev, S., Zhilyaev, A., Dyakov, A., Chupeeva, A., Alekseev, A., Martynov, D., Akhatov, I., & Evlashin, S. Intermetallics
Codeposition of Pd and Pb and electrocatalytic properties of their composite.
Podlovchenko, B. I., Maksimov, Y. M., Volkov, D. S., & Evlashin, S. A. Journal of Electroanalytical Chemistry
Laser-induced Forward Transfer Hydrogel Printing : A Defined Route for Highly Controlled Process.
Yusupov, V., Churbanov, S., Churbanova, E., Bardakova, K., Antoshin, A., Evlashin, S., Timashev, P., & Minaev, N. International Journal of Bioprinting
Covalent and noncovalent films made up of sulfonimide-based dendrimers.
Bondareva, J., Luchkin, S., Dagesyan, S., Egorov, A., Evlashin, S., & Lukin, O. Applied Surface Science

Q2 (Scopus indicated)
Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating.
Shishkovsky I., Kakovkina N., Scherbakof V.  Procedia CIRP
Residual Life Prediction of Gas-Engine Turbine Blades Based on Damage Surrogate-Assisted Modeling.
B. Vasilyev, S. Nikolaev, M. Raevskiy, S. Belov, I. Uzhinsky. Appl. Sci.
Sulfonimide-Based Dendrimers: Progress in Synthesis, Characterization, and Potential Applications.
J. Bondareva, S. Evlashin, and O. Lukin. Polymers (Basel)
Hardening of Additive Manufactured 316l Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction. 
M. Filimonov, O. Rogozin, D. Firsov, Y. Kuzminova, S. Sergeev, A. Zhilyaev, M. Lerner, N.Toropkov, A. Simonov, I. Binkov, I. Okulov, I. Akhatov, and S. Evlashin. Materials (Basel)

Evolution of SLA-Based Al2O3 Microstructure During Additive Manufacturing Process. 
S. Chugunov, N.A. Adams, I. Akhatov. Materials
Design and Fabrication of Complex-Shaped Ceramic Bone Implants via 3D Printing Based on Laser Stereolithography. 
Safonov A, Maltsev E, Chugunov S, Tikhonov A, Konev S, Evlashin S, Popov D, Pasko A, Akhatov I. Applied Sciences.
Specific aspects of the transitional layer forming in the aluminium bronze – stainless steel functionally graded structures after laser metal deposition.
K. Makarenko, O. Dubinin, P. Shornikov, I. Shishkovsky. Procedia CIRP
Analytical Evaluation of the Dendritic Structure Parameters and Crystallization Rate of the Laser Deposited Fe-Cu Functionally Graded Materials.
K. Makarenko, I.Shishkovsky, O. Dubinin. Materials. 
Very High Cycle Fatigue Behavior of Additively Manufactured 316L Stainless Steel.
B. Voloskov, S. Evlashin, S. Dagesyan, S. Abaimov, I.S. Akhatov, I. Sergeichev. Materials
Oscillatory Behavior in Oxidation of Propane Over Nickel Foil and Films. 
VV Kaichev, A Yu Gladky, AA Saraev, SS Kosolobov, OV Sherstyuk, VI Bukhtiyarov. Topics in Catalysis
Effect of additives on cure kinetics of pultrusion resins.
Nasonov Y, Safonov A, Gusev S, Akhatov I. Procedia Manufacturing
Investigation on the Shape Distortions of Pultruded Profiles at Different Pulling Speed.
Vedernikov A, Tucci F, Safonov A, Carlone P, Gusev S, Akhatov I. Procedia Manufacturing
Pultruded Materials and Structures: A Review.
Vedernikov, Alexander, Alexander Safonov, Fausto Tucci, Pierpaolo Carlone, and Iskander Akhatov. Journal of Composite Materials
Interface strength of glass fibres in polypropylene: dependence on the cooling rate and the degree of crystallinity.
Mahato, B., Babarinde, V. O., Abaimov, S., Lomov S. V. and Akhatov I. Polymer Composites

Q3 (Scopus indicated)
4D Laser Printing of Functionally Graded Structures and Items from Mixtures of Powdered Polymers with Functional Micro- and Nanoparticles: An Autoreview.
Shishkovsky I., Scherbakov V., Kuznetsov M., Belousova O., Morozov Y. International Journal of Self-Propagating High-Temperature Synthesis
Calculation technique of satellite imaging quality assessment criterion based on geometrical concentration calculation.
Maltsev E.A., Maglinets Yu.A., Brezhnev R.V. Sovremennye problemy distantsionnogo zondirovaniya Zemli iz kosmosa.
Localization of Deformation in Lattice Structures of 3D-Printed Samples of 03X17H14M2 Steel.
D.G. Firsov, S.D. Konev, O.N. Dubinin, S.A. Evlashin, and I.V. Shishkovsky. Technical Physics Letters
Application of the Optoacoustic Method to Assess the Effect of Voids on the Crack Resistance of Structural Carbon Plastics.
Vorobyev, R.I., Sergeichev, I.V., Karabutov, A.A., E. A. Mironova, E. V. Savateeva, I. Sh. Akhatov. Acoust. Phys

Q4 (Scopus indicated)
Hybrid Data-Driven and Physics-Based Modeling for Gas Turbine Prescriptive Analytics.
S. Belov, S. Nikolaev, I. Uzhinsky. Int. J. Turbomach. Propuls. Power
Micro-scale numerical study of fiber/matrix debonding in steel fiber composites.
B. Sabuncuoglu, S.V Lomov. Journal of Engineered Fibers and Fabrics
Adhesion energy of ethane–graphite interface: Atomistic study.
Iakovlev, E. S., Zhilyaev, P. A., Akhatov, I. S. Journal of Physics

Conference proceedings
Q3 (Scopus indicated)
Directional excitation of bloch surface wave with silicon nanoparticle.
Kokareva, N., Afinogenov, B., Gulkin, D., Shilkin, D., Zhigunov, D., Bessonov, V., Fedyanin, A. AIP Conference Proceedings
Q4 (Scopus indicated)
The objective assessment of the image quality based on the geometrical concentration E3S Web Conf.
Maltsev, E.A., Maglinets, Y.A., Brezhnev R.V.
Mathematical simulation the kinetics of polymerization of vinyl ester resin using in pultrusion.
Nasonov, Y.; Safonov, A.; Gusev, S.; Akhatov, I. IOP Conf. Ser. Mater. Sci. Eng.
Spring-in experimental evaluation of L-shaped pultruded profiles. 
Vedernikov, A.N.; Safonov, A.A.; Gusev, S.A.; Carlone, P.; Tucci, F.; Akhatov, I.S. IOP Conf. Ser. Mater. Sci. Eng. 
Direct Energy Deposition of Cu-Fe System Functionally Graded Structures. 
Makarenko K., Shishkovsky I. IOP Conference Series: Materials Science and Engineering (MSE)