Peer-reviewed journals

Q1 (Scopus indicated)
Self-diagnostic carbon nanocomposites manufactured from industrial epoxy masterbatches.
Butt H.A, Lomov S.V, Akhatov I.S, Abaimov S.G. Composite Structures
DOI:10.1016/j.compstruct.2020.113244
Experimental characterisation of textile compaction response: A benchmark exercise.
A.X.H. Yong, A. Aktas, D. May, A. Endruweit, S.V. Lomov, S. Advani, P. Hubert, S.G. Abaimov, D. Abliz, I. Akhatov, M.A. Ali, S. Allaoui, T. Allen, D.C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. et al. DOI:10.1016/j.compositesa.2020.106243
Effects of pulling speed on structural performance of L-shaped pultruded profiles.
Vedernikov A, Tucci F, Carlone P, Gusev S, Konev S, Firsov D, Akhatov I, Safonov A. Composite Structures
DOI:10.1016/j.compstruct.2020.112967
Fine-tuning of the electro-optical switching behavior in indium tin oxide.
Pshenichnyuk, I.A., Kosolobov, S.S., Drachev, V.P. Physical Review B
DOI:10.1103/PhysRevB.103.115404

Surface-specific washing-free immunosensor for time-resolved cortisol monitoring.
Safarian, S.M., Kusov, P.A., Kosolobov, S.S., Kotelevtsev, Y.V., Drachev, V.P.
DOI:10.1016/j.talanta.2020.122070
Regolith-based additive manufacturing for sustainable development of lunar infrastructure. An overview. 
Isachenkov, M., Chugunov, S., Akhatov, I., Shishkovsky, I. Acta Astronautica
DOI:10.1016/j.actaastro.2021.01.005
Progress and challenges of 3D-printing technologies in the manufacturing of piezoceramics.
Smirnov, A., Chugunov, S., Kholodkova, A., Vasin, A., Shishkovsky, I. Ceramics International
DOI:10.1016/j.ceramint.2020.12.243
Fatigue behavior of additive manufactured CrFeCoNi medium-entropy alloy.
Kuzminova, Y.O., Firsov, D.G., Dagesyan, S.A., Akhatov, I.S., Evlashin, S.A.
Journal of Alloys and Compounds
DOI:10.1016/j.jallcom.2021.158609
Multiscale numerical modeling for prediction of piezoresistive effect for polymer composites with a highly segregated structure.

Lebedev, O.V., Ozerin, A.N., Abaimov, S.G. Nanomaterials, 2021, 11(1), pp. 1–15, 162
DOI:10.3390/nano11010162
Clusters and avalanches of fibre breaks in a model of an impregnated unidirectional fibre bundle under tension
Lomov, S.V., Breite, C., Melnikov, A., Mesquita, F., Swolfs, Y., Abaimov, S.G.
International Journal of Solids and Structures, 2021, 225, 111061
DOI:10.1016/j.ijsolstr.2021.111061
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise.
Yong, A.X.H., Aktas, A., May, D., Endruweit, A., Advani, S., Hubert, P., Abaimov, S.G., ...
Composites Part A: Applied Science and Manufacturing, 2021, 148, 106480
DOI:10.1016/j.compositesa.2021.106480
Regolith-based Additive Manufacturing for Sustainable Development of Lunar Infrastructure – an Overview.
Isachenkov M., Chugunov S., Akhatov I., Shishkovsky I. Acta Astronautica, Vol. 180, March 2021, p. 650-678
DOI:10.1016/j.actaastro.2021.01.005
Characterization and performance of a 3D-printed two-phase closed thermosyphon.
Mohseni-Gharyehsafa B., Lyulin Y. V., Evlashin S. A., Kabov O. A. and Ouerdane H. Therm. Sci. Eng. Prog., 2021, 101 001
DOI: 10.1016/j.tsep.2021.101 001
Structural evolution during nanostructuring of additive manufactured 316L stainless steel by high-pressure torsion.
Han J-K, Liu X, Lee I, Kuzminova Y O, Evlashin S A, Liss K-D and Kawasaki. Mater. Lett., 2021, 130364
DOI: 10.1016/j.matlet.2021.130364
Fabrication and characterization of quasi-three-dimensional capacitor structure based on carbon nanowalls
Mumlyakov A.M., Shibalov M.V., Timofeeva E.R.,Trofimov I.V.,Porokhov N.V.,Evlashin S.A.,Nekludova P.A.,Pershina E.A.,Anufriev Y.V.,Tagachenkov A.M.,Zenova E.V.,Tarkhov M.A. Carbon, 2021, 184, pp. 698–705
DOI: 10.1016/j.carbon.2021.08.078
Plasma modification of carbon nanowalls induces transition from superhydrophobic to superhydrophilic
Evlashin S.A., Bondareva J.V., Aslyamov T.F., Lyulin Y.V., Maslakov K.I., Mironovich K.V.,Tarkhov M.A., Ouerdane H. Nanotechnology, 2021, 32(43), 435706
DOI: 10.1088/1361-6528/ac153f
Chemical space mapping for multicomponent gas mixtures
Kotliar-Shapirov A., Fedorov F.S., Ouerdane H., Evlashin S., Nasibulin A.G., Stevenson K.J. Journal of Electroanalytical Chemistry, 2021, 895, 115472
DOI:10.1016/j.jelechem.2021.115472
Negative Differential Resistance in Carbon-Based Nanostructures
Evlashin S.A., Tarkhov M.A., Chernodubov D.A., Inyushkin A.V., Pilevsky A.A., Dyakonov P.V., Pavlov A.A., Suetin N.V., Akhatov I.S., Perebeinos V. Physical Review Applied, 2021, 15(5), 054057
DOI: 10.1103/PhysRevApplied.15.054057
Dielectric properties investigation of a compound based on atomic layer deposited multi-layer structure
Mumlyakov A.M., Shibalov M.V., Trofimov I.V., Verkholetov M.G., Orlov A.P., Diudbin G.D., Evlashin S.A., Nekludova P.A., Anufriev Y.V., Tagachenkov A.M., Zenova E.V., Tarkhov M.A. Journal of Alloys and Compounds, 2021, 858, 157713
DOI: 10.1016/j.jallcom.2020.157713
Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy
Zhao W., Han J.-K., Kuzminova Y.O., Evlashin S.A., Zhilyaev A.P., Pesin A.M., Jang J.-I.e, Liss K.-D., Kawasaki M. Materials Science and Engineering A, 2021, 807, 140898
DOI: 10.1016/j.msea.2021.140898
NATURE INDEX

Novel flight style and light wings boost flight performance of tiny beetles
Farisenkov, S.E., Kolomenskiy, D., Petrov, P.N. et al. Nature, 2022
DOI:10.1038/s41586-021-04303-7
In Situ Heating Neutron and X-Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive-Manufactured 316L Stainless Steel
Kawasaki M., Han J.-K., Liu X., Onuki Y., Kuzminova Y.O., Evlashin S.A., Pesin A.M., Zhilyaev A.P., Liss K.-D., Advanced Engineering Materials, 2021
DOI: 10.1002/adem.202100968
Covalent and noncovalent films made up of sulfonimide-based dendrimers
Bondareva J., Luchkin S., Dagesyan S., Egorov A., Evlashin S., Lukin O. Applied Surface Science, 2021, 535, 146345
DOI: 10.1016/j.apsusc.2020.146345
Shape memory behavior of unidirectional pultruded laminate
Korotkov R., Vedernikov A., Gusev S., Alajarmeh O., Akhatov I., Safonov A. Composites Part A: Applied Science and Manufacturing, 2021, 150, 106609
DOI: 10.1016/j.compositesa.2021.106609
Compressive behaviour of hollow box pultruded FRP columns with continuous-wound fibres
Alajarmeh O., Zeng X., Aravinthan T., Shelley T., Alhawamdeh M., Mohammed A., Nicol L., Vedernikov A., Safonov A., Schubel P. Thin-Walled Structures, 2021, 168, 108300
DOI: 10.1016/j.tws.2021.108300
Modeling spring-in of l-shaped structural profiles pultruded at different pulling speeds
Vedernikov, A., Safonov, A., Tucci, F., Carlone, P., Akhatov, I. Polymers, 2021, 13(16), 2748
DOI: 10.3390/polym13162748
Anti-icing fluids interaction with surfaces: Ice protection and wettability change
Grishaev V.G. ,Borodulin I.S., Usachev I.A., Amirfazli A., Drachev V.P., Rudenko N.I., Gattarov R.K., Bakulin I.K., Makarov M.V., Akhatov I.S. International Communications in Heat and Mass Transfer, 2021, 129, 105698
DOI: 10.1016/j.icheatmasstransfer.2021.105698
Constitutive material model for the design and virtual testing of pressure vessel service equipment manufactured from thermoplastic fiber-reinforced polymer composites
Sergeichev I., Fedulov B., Fedorenko A., Zershchikov K., Lomakin E., Akhatov I. International Journal of Pressure Vessels and Piping, 2021, 193, 104475
DOI: 10.1016/j.ijpvp.2021.104475
Thermoplastic Pultrusion: A Review. 
Minchenkov K, Vedernikov A, Safonov A, Akhatov I. Polymers
DOI:10.3390/polym13020180
Fiber-reinforced polymers in freeform structures: A review
Moskaleva, A., Safonov, A., Hernández-Montes, E. Buildings, 2021, 11(10), 481
DOI: 10.3390/buildings11100481


Q2 (Scopus indicated)
Multiscale numerical modeling for prediction of piezoresistive effect for polymer composites with a highly segregated structure.
Lebedev O.V, Ozerin A.N, Abaimov S.G. Nanomat.
DOI:10.3390/nano11010162
Material modelling of FDM printed PLA part.
Volgin, O., Shishkovsky, I. Engineering Solid Mechanics
DOI:10.5267/j.esm.2020.12.004
Hybrid function representation for heterogeneous objects.
Tereshin, A., Pasko, A., Fryazinov, O., Adzhiev, V. Graphical Models
DOI:10.1016/j.gmod.2021.101098
Surface modification of aluminum 6061-O Alloy by plasma electrolytic oxidation to improve corrosion resistance properties.
Dzhurinskiy, D.V., Dautov, S.S., Shornikov, P.G., Akhatov, I.Sh. Coatings
DOI:10.3390/coatings11010004

Review - Recent Advances in Thermally Conductive Paper-Like Films.
Owais, M., Javed, M.H., Akram, M.Z., Akhatov, I.S., Abaimov, S.G. ECS Journal of Solid State Science and Technology.
DOI:10.1149/2162-8777/abea5b
CAD/CAM System for Additive Manufacturing with a Robust and Efficient Topology Optimization Algorithm Based on the Function Representation.
Popov, D.; Kuzminova, Y.; Maltsev, E.; Evlashin, S.; Safonov, A.; Akhatov, I.; Pasko, A. Applied Sciences 2021, 11, 7409
DOI:10.3390/app11167409
Effects of additives on the cure kinetics of vinyl ester pultrusion resins.
Vedernikov, A.; Nasonov, Y.; Korotkov, R.; Gusev, S.; Akhatov, I.; Safonov, A. Journal of Composite Materials 2021
DOI:10.1177/00219983211001528
Review - Recent Advances in Thermally Conductive Paper-Like Films
Owais, M., Javed, M.H., Akram, M.Z., ...Akhatov, I.S., Abaimov, S.G.
ECS Journal of Solid State Science and Technology, 2021, 10(3), 033001
DOI: 10.1149/2162-8777/abea5b
Additive manufacturing of polymer composites with nano- titania inclusion.
Shishkovsky I.V., Scherbakov V.I. Laser Physics Letters, 2021, 18 066001
DOI:10.1088/1612-202X/abf83b
Structural effect of low Al content in the in-situ additive manufactured CrFeCoNiAlx high-entropy alloy.
Y. Kuzminova, A. Shibalova, S. Evlashin, I. Shishkovsky, P. Krakhmalev. Materials Letters, Vol. 303, 15 November 2021, 130487.
DOI: 10.1016/j.matlet.2021.130487
An accelerated slicing algorithm for FRep models
E. Maltsev, D. Popov, S. Chugunov, A. Pasko, I. Akhatov. Applied Sciences, 2021, 11, 6767.
DOI:10.3390/app11156767
Anisotropy of Mechanical Properties and Residual Stress in Additively Manufactured 316L Specimens

A. Fedorenko, B. Fedulov, Y. Kuzminova, S. Evlashin, O. Staroverov, M. Tretyakov, E. Lomakin, I. Akhatov. Materials, 2021, 14 (23), 7176
DOI: 10.3390/ma14237176
A comparative analysis of energy and water consumption of mined versus synthetic diamonds
Zhdanov V.,Sokolova M.,Smirnov P.,Andrzejewski L.,Bondareva J.,Evlashin S., Evlashin S. Energies, 2021, 14(21), 7062
DOI: 10.3390/en14217062
Modification of mechanical properties in directed energy deposition by a static magnetic field: Experimental and theoretical analysis
Filimonov A.M., Rogozin O.A., Dubinin O.N., Kuzminova Y.O.,Shibalova A.A.,Okulov I.V.,Akhatov I.S.,Evlashin S.A. Materials, 2021, 14(18), 5190
DOI: 10.3390/ma14185190
Effect of Scanning Strategy on Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Laser Direct Energy Deposition
Marina O. Gushchina, Yulia O. Kuzminova, Egor A. Kudryavtsev, Konstantin D. Babkin, Valentina D. Andreeva, Stanislav A. Evlashin & Evgeniy V. Zemlyakov. Journal of Materials Engineering and Performance, 2021
DOI: 10.1007/s11665-021-06407-7
Modeling water droplet freezing and collision with a solid surface
Shayunusov D., Eskin D., Balakin B.V., Chugunov S., Johansen S.T., Akhatov I.
Energies, 2021, 14(4), 1020
DOI: 10.3390/en14041020
The Dynamics of Bumblebee Wing Pitching Rotation: Measurement and Modelling
Kolomenskiy D., Ravi S., Xu R., Ueyama K., Jakobi T., Engels T., Nakata T., Sesterhenn J., Farge M., Schneider K., Onishi R., Liu, H.
DOI: 10.1007/978-3-030-55594-8_13



Q3 (Scopus indicated)
Computer-Aided Modeling and Additive Manufacturing of Promising Protective Layer Materials for Catalytic Reactors
Nikulshin P.A., Dorokhov V.S.,Ovsienko O.L., Rogozina M.V., Anikeev N.A., Sidel’nikov I.V., Chugunov S.S. Petroleum Chemistry, 2021, 61(11), pp. 1207–1216
DOI: 10.1134/S0965544121110098
Conference proceedings
Q4
Modelling and experimental validation of thermoset resin curing during pultrusion.

Vedernikov A, Safonov A, Akhatov I. IOP Conference Series Materials Science and Engineering 1129(1)

DOI:10.1088/1757-899X/1129/1/012011

Non-Linearity of Electrical Conductivity for Aligned Multi-Walled Carbon Nanotube Nanocomposites: Numerical Estimation of Significance of Influencing Factors
Stepan V. Lomov; Iskander S. Akhatov; Jeonyoon Lee; Brian L. Wardle; Sergey G. Abaimov. IEEE Conference on Nanotechnology Proceedings, 2021, 378-381
DOI: 10.1109/NANO51122.2021
CNT/Epoxy-Masterbatch Based Nanocomposites: Thermal and Electrical Properties
H. A. Butt;M. Owais;A. Sulimov;D. Ostrizhiniy;S. V. Lomov;I. S. Akhatov;S. G. Abaimov;Y. A. Popov. IEEE Conference on Nanotechnology Proceedings, 2021, 417-420
DOI: 10.1109/NANO51122.2021
Modeling and Visualization of Multi-material Volumes.
P.-A. Fayolle, L. McLoughlin, M. Sanchez, G. Pasko, A. Pasko. Scientific Visualization, 2021, volume 13, number 2, pp. 117 - 148.
DOI: 10.26583/sv.13.2.09
Modeling and Simulation of Tissue Spheroids Fusion Based on the Function Representation Approach.
C. Pakhomova, A. Pasko, I. Akhatov. Materials Science Forum, ISSN: 1662-9752, Vol. 1046, 2021, pp. 119-123.
DOI:10.4028/www.scientific.net/
MSF.1046.119
Study of the efficiency of drying grass seeds for forage crops on a rotary dryer
Smelik, V.A., Perekopskiy, A.N., Dobrinov, A.V., Chugunov, S.V. E3S Web of Conferences, 2021, 262, 01037
DOI:10.1051/e3sconf/202126201037
Analysis and estimate of efficiency technological methods the destruction of Sosnowsky hogweed in the north-west region of Russia
Dobrinov, A.V., Trifanov, A.V., Chugunov, S.V. IOP Conference Series: Earth and Environmental Science, 2021, 723(3), 032087
DOI: 10.1088/1755-1315/723/3/032087